Unique Baby Blanket Gifts

Now you need to sew it together with the batting and the backing. As you probably already know, a blanket isn't just made of one layer. You will have to sew it together and then stitch across the entire quilt to hold it all together. This is where you can get fancy and make pretty stitch designs. If you are looking to get this done fast, just do a basic straight stitch across the whole blanket. You will have to do this sewing by hand, so get a comfy position on your couch and get sewing!

Make bookmarks. Cut the block into strips about three inches wide. Fuse them to another piece of fabric cut the same size. Hot glue rick rack around the edges for a no-sew finish. Crafty people comfortable with sewing may use a zig zag or satin stitch to finish them out. If hand stitching, use a blanket stitch to complete the edge.

Blanket Quilt Now you will need to begin putting it together. Follow your pattern and read the instructions carefully to know how to do this correctly. If you have small pieces, you will have to sew them together first to make larger squares and them continue to sew them together to make the larger blanket. For this you will need to use a sewing machine. Sew them together and add the border.

Use the tailor's chalk to draw lines connecting the marks at the bottom of the fabric to the marks at the top. You want the lines to be as straight as possible. To achieve this, take something long and flat (like a long piece of cardboard) and use it as a guide while you draw the lines.

When enough material collected they were sewn together in larger pieces called sheet or blocks. This was not an act of boredom or an idle hobby. These quilts were much needed and as soon as they were completed they went to member of the family who was most in need of it. This was often the youngest or oldest in the home.

11. There's a chance that, during sewing, the three pieces won't stay as evenly lined up as you would like. In that case, use the shears or rotary cutter to trim the edges.

Now use a steam iron to turn and press the rectangle over the seam allowance, pressing away from the center piece. Trim the seam allowance close to the stitching line to remove the bulk in your design.

Dress up an old jacket or cardigan by heat bonding a block onto the center backside. Use fabric paint to trim out the edges of it or add an anti-fray product to the edges. If you are accustomed to sewing, add a zig zag or satin stitch to secure the edges and add a nice finish.