Quilt As Contrasted With. Comforter: A Bedding Dilemma

If one is machine piecing they can use the flag method and join a few pairs of patches at the same time. The right sides are pinned together in pairs. Using the foot as a guide one along the seam line machine stitches. Between the pairs a short uncut thread should be left. Each is then cut into units. Enough pairs are then joined to make a patched piece. Avoid bulk by pressing flat to one side the patch seams.

First decide on the finished foundation (muslin) size for each block and cut the muslin one half inch larger than the desired finished block size. This allows for any puckering or tight tension variations that could draw up the size. You can always cut the finished piece down to the proper size later. Also remember that the finished block size in this case is the unfinished block size for your quilt. You will have to have a seam allowance to sew your blocks together into a quilt. A half inch should provide this necessary allowance.

Last but not least, the quilt was marked for quilting. This was a very vital part of the quilting process as it would be seen on the top of the quilt as well as it must also be seen on the bottom when you turned down the bed at night. This took quite a bit of time and consideration. You did not want the design of the quilting to take away the look of the quilt but to enhance the beauty of the creation.

Don't be afraid to use your handmade quilt. The layers and the warmth of the batting make it perfect for keeping you warm cold winter nights. Even after many years of use, this author has several quilts that are still in excellent condition.

11. There's a chance that, during sewing, the three pieces won't stay as evenly lined up as you would like. In that case, use the shears or rotary cutter to trim the edges.

Blanket Quilt For a crazy quilt, large or small, you should work on a square or rectangle of muslin or plain fabric. Working 12" or smaller is recommended so that the piecing is easier to handle.

For making perfectly straight cuts, choose a thick, clear acrylic ruler. A good size to start with is a 6x24" rectangular ruler marked in 1/4" increments.