Make It More Personal With Custom Blankets

This caused most families to start saving bits and pieces of scrap material. It was not uncommon to see bins of random materials scattered in small piles of the early colonial homes as they hoped to gather enough to eventually construct a quilt.

When you are in the midst of selecting the blankets, you must avoid those poorly made products. You are reminded to choose products which come with high threat count. In order to minimize down leakage, you need to get a blanket with a thread count of at least 220. At the same time, you are reminded to focus on the stitching. It will be better for you to pick those blankets with regular V stitching, box stitching or quilt squares. Besides, it is also important for you to feel the materials personally when you shop around. Don't be shy to test the products. You are advised to feel the blankets with your fingers and play with the materials. If possible, you should hold each blanket against your face to find out how soft and warm it is before you purchase. Make the selection carefully.

Never dry on high heat. Use low temperature to start the drying process then remove it from the dryer and lay it flat to finish drying. Once it is nearly dry, you can put it back in the dryer on low or air for a short time to fluff it up and finish drying.

Blanket Quilt If one is machine piecing they can use the flag method and join a few pairs of patches at the same time. The right sides are pinned together in pairs. Using the foot as a guide one along the seam line machine stitches. Between the pairs a short uncut thread should be left. Each is then cut into units. Enough pairs are then joined to make a patched piece. Avoid bulk by pressing flat to one side the patch seams.

First decide on the finished foundation (muslin) size for each block and cut the muslin one half inch larger than the desired finished block size. This allows for any puckering or tight tension variations that could draw up the size. You can always cut the finished piece down to the proper size later. Also remember that the finished block size in this case is the unfinished block size for your quilt. You will have to have a seam allowance to sew your blocks together into a quilt. A half inch should provide this necessary allowance.

A century ago, cigar companies tied a bright colored silk ribbon around a bundle of cigars. Women stitched them together with black or colored embroidery floss stitches onto a fabric foundation block. They were not cut or curved, but placed side by side. Cigar company ribbons had fancy logos and used attractive fonts in black ink on yellow or orange ribbons. The various advertising on the ribbons added decoration to the quilt block. Green, pink and purple ribbons were occasionally used in the block designs, signifying a rare cigar.

The preferred needle type for woven cotton fabrics is called a "sharp." Sizes 75/11 and 80/12 are good choices for piecing, quiltmaking, and binding most simple quilt patterns. Use a smaller needle (70/10) if you're piecing tightly woven batiks and a larger needle (90/14) for flannels. Dull needles can cause skipping or uneven stitches, so it's a good idea to insert a fresh needle at the start of every project.

Have you ever needed to throw together a quick quilt? Many quilting pros laugh at the notion, but sometimes we need a quick gift to give and want to make it personal. Lap quilts and baby quilts are very easy to create on an embroidery machine.