Baby Bedding Sets - What You Want

If one is machine piecing they can use the flag method and join a few pairs of patches at the same time. The right sides are pinned together in pairs. Using the foot as a guide one along the seam line machine stitches. Between the pairs a short uncut thread should be left. Each is then cut into units. Enough pairs are then joined to make a patched piece. Avoid bulk by pressing flat to one side the patch seams.

You can either hand quilt or machine quilt your baby shower gift. Following the perimeter of the shape or you can choose to use a quilter's pencil and template and draw a design and quilt the design. Either way, you will be stitching through all three layers, which not only fasten the layers together, but create a design, as you quilt.

Blanket Quilt Another way to customize a blanket is by including text in it. This may be a favorite punch line; a line from a song; a secret code between the two of you; a meaningful date; or even a surname.

For each block you want to make also cut a five-sided piece of solid fabric. Make the sides angular, not parallel. Don't make it too big or too small roughly about a ninth of the block (like a tic tac toe pattern on the muslin foundation square). It will serve as your crazy, off center middle of your design.

With right sides facing each other, place another rectangle, this time a solid one, over the first rectangle and edges even with side 2 of the center piece. Always cover the previous piece (in this case the first rectangle). Sew from the edge of the previous rectangle to the edge of side 2.

Next up is the crib sheet. These are usually fitted. If it is not fitted, don't bother. Your child may sleep like an angel, or they may move around a lot. Either way, a fitted sheet will keep itself in place instead of getting wrapped up around your child, which is about as bad as it sounds.

First, you need to find two boards, ideally of a hardwood such as oak. It is crucial that they are longer than the width of your quilt. Next, you need to staple or stitch a piece of durable material around the boards, such as heavy cotton or denim. Form the fabric into a slack tube, loose enough to leave a flap of fabric to which the quilt ends can be attached, while ensuring that the material is firmly fixed to the boards.